SilentKnight VisorAlarm ARLY Interface - Manual (Page 52)

VISOR ALARM – ARLY Configuration
II - 47
Doc.DM359-I
Rev.2.0
9 ARLY_20: Stored alarm is deleted after being sent to the automation software.
9 ARLY_37: Percentage indication for the stored alarms with respect to the size of the
temporary buffer.
ƒ MIP events. These events indicate the active MIPs status and the registering of new MIPs.
Events encompassed in this functionality are as follows:
9 ARLY_7: Registers a stored MIP.
9 ARLY_12: A contact frame has been received from an MIP with a specified account
number.
9 ARLY_13: A keep-alive frame has been received from an MIP with a specified
account number.
9 ARLY_24: A register frame from an MIP with a specified account number.
9 ARLY_25: Remote configuration of an MIP with a specified account number.
ƒ System events. Indicates the status of the VisorALARM (ACTIVE, BACKUP, etc.) and the
MIP. The events encompassed by this functionality are as follows:
9 ARLY_34: Indicates a change in the status of the main VisorALARM.
9 ARLY_35: Indicates a change in the status of the backup VisorALARM.
9 ARLY_36: Indicates a change in the status of the MIP (failover).
ƒ Configuration synchronization protocol events. These events describe the different phases of
the synchronization protocol. Events encompassed in this functionality are as follows:
9 ARLY_29: The main VisorALARM is accessible.
9 ARLY_32: Synchronization protocol events in the main VisorALARM.
9 ARLY_33: Synchronization protocol events in the backup VisorALARM.
ƒ Serial line events with the automation SW. These are data transmission/reception events for
the serial line. Events encompassed in this functionality are as follows:
9 ARLY_4: A frame has been received from the serial line connected to the automation
SW.
9 ARLY_5: A frame has been sent to the serial line connected to the automation SW.
ƒ Communication events. These are events on the sending and receiving of data in the
VisorALARM. Not all the possible events are displayed, as this would imply overloading the
printer which would consequently operate inefficiently. In any case, you can access the
information on all the packets received and sent by the VisorALARM through the console.
The event encompassed in this functionality is as follows:
9 ARLY_10: A frame has been received from an MIP.
ƒ IP address monitoring events. These are events on the monitoring status of a server which
indicates a possible communications error. The event encompassed in this functionality is as
follows:
9 ARLY_3: Monitoring message on the server IP address.
ƒ Error events. These events indicate errors detected in the system. Events encompassed in this
functionality are as follows:
9 ARLY_17: Error frame from an MIP with a specified account number.
9 ARLY_18: Lost alarm from an MIP with a specified account number.
9 ARLY_21: Alarm lost. No buffer to process it.
9 ARLY_14: The supervision time for an MIP with a specified account number has
timed out.
9 ARLY_15: Erroneous supervision frame from an MIP with a specified account
number.