HP Designjet 4500 Printer series - Manual (Page 105)

2. The front panel will display some information, including the printer's IP address. Make a note of
the IP address (16.23.61.128 in this example).
3. Insert the Drivers and Documentation CD into your computer. If the CD does not autorun, run
the START.EXE program in the root folder of the CD.
4. Click the Install button.
5. Follow the instructions on your screen to set up the printer. The following notes will help you to
understand the screens and make appropriate choices.
● When asked how the printer is connected, choose Connected via the network.
● The configuration program will look for printers connected to your network. When the
search has finished, a list of printers will be displayed. Identify your printer by its IP address
and select it from the list.
● The configuration program will analyze the network and the printer. The program will detect
the network settings and will suggest the settings to be used when configuring the printer.
It is not normally necessary to change any of these settings.
Manual IP address configuration
In this case, there is no IP address at the moment of starting the installation. The installation process
will consist of detecting the printer, configuring its IP address, and installing the driver with these
settings. Perform the following steps:
1.
Go to the front panel and select the icon, then I/O setup > Fast Ethernet (or Gigabit
Ethernet) > View configuration.
2. The front panel will display some information, including the printer's MAC address. Make a note
of the MAC address.
3. Insert the Drivers and Documentation CD into your computer. If the CD does not autorun, run
the START.EXE program in the root folder of the CD.
4. Click the Install button.
ENWW Connect to a network (Windows) 91
How do I... (software
setup
topics)