HP Designjet 4500 Printer series - Manual (Page 124)

11. To make sure that the right end of the spindle is in place, check that the spindle lever is in its
top position (horizontal). You can move the lever yourself if necessary.
If you are a regular user of different paper types, you can change rolls more quickly if you pre-load
rolls of different paper types on different spindles. Extra spindles are available for purchase.
Load a roll into the printer [4000]
NOTE This topic applies to the HP Designjet 4000 Printer series only.
To start this procedure you need to have a roll loaded on the spindle. See Load a roll onto the
spindle [4000].
1.
At the printer's front panel, select the icon, then Paper load > Load roll.
2. The front panel displays a list of paper types.
3. Select the paper type you are using. If it is not clear which you should select, see Supported
paper types.
4. Wait until the front panel prompts you to open the window.
110 Chapter 6 How do I... (paper topics) ENWW
How do
I... (paper topics)