HP Designjet 4500 Printer series User Manual
Page 71
Advertising
4.
Slide drawer 1 out until it touches the foam packaging.
5.
Place the stand upside down on top of the printer body. Make sure you position the stand pins
in the holes in the center of the printer body brackets. The anti-slip material should face to the
rear of the printer.
6.
Fix the right side of the stand to the printer using one screw. Make sure that the screw is fully
tightened.
ENWW
Attach the stand
57
How do I... (printer
assembly topics) [4500]
Advertising
This manual is related to the following products: