HP Designjet 4500 Printer series User Manual
Page 133
Advertising
5.
Press the roll towards the black paper stop until it clicks into place.
NOTE If you have difficulty with this, try turning the spindle to a vertical position, so that
gravity presses the roll against the stop.
6.
Ensure there is no space between the roll and the black stop.
7.
Put the blue paper stop on to the other end of the spindle, and push it towards the end of the roll.
8.
Ensure there is no space between the roll and the blue stop.
ENWW
Load a roll onto the spindle [4500]
119
How do I...
(paper topics)
Advertising
This manual is related to the following products: