HP Designjet 4500 Printer series - Manual (Page 351)

Regulatory notices
You can obtain current Material Safety Data Sheets for the ink systems used in the printer by mailing
a request to this address: Hewlett-Packard Customer Information Center, 19310 Pruneridge Avenue,
Dept. MSDS, Cupertino, CA 95014, U.S.A.
There is also a Web page: http://www.hp.com/hpinfo/community/environment/productinfo/
psis_inkjet.htm
Regulatory Model Number
For regulatory identification purposes, your product is assigned a Regulatory Model Number (RMN).
The Designjet 4000 and 4500 Printer series comprise various products. The Regulatory Model
Number for your product is as follows:
RMN Product family
BCLAA-0401 HP Designjet 4000 Printer series
HP Designjet 4500 Printer series
HP Designjet 4500 mfp series
BCLAA-0503 HP Designjet 4500 Scanner series
BCLAA-0504 HP Designjet 4500 Stacker series
The Regulatory Model Number (RMN) should not be confused with the marketing name (HP
Designjet 4000/4500 Printer series, HP Designjet 4500 Scanner, or HP Designjet 4500 Stacker) or
product number.
ELECTROMAGNETIC COMPATIBILITY (EMC)
WARNING! This is a class A product. In a domestic environment this product may cause
radio interference, in which case the user may be required to take adequate measures.
FCC statements (U.S.A.)
The U.S. Federal Communications Commission (in 47 cfr15.105) has specified that the following
notices be brought to the attention of users of this product.
Shielded cables
Use of shielded data cables is required to comply with the Class A limits of Part 15 of the FCC Rules.
CAUTION Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
equipment not expressly approved by the Hewlett-Packard Company may cause harmful
interference and void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case users will be required to correct the
interference at their own expense.
ENWW Regulatory notices 337
Legal information