HP Designjet 4500 Printer series - Manual (Page 77)

3. Rotate the printer until its rear rests on the spare and consumables boxes and the wheels with
the anti-slip material touch the floor.
4. Remove the pallet before trying to lift the printer into an upright position.
5. Using four people and the handholds on the rear of the printer body, carefully lift the printer into
an upright position.
6. Rotate the printer into an upright position. The anti-slip material should stop the printer from
sliding forwards.
ENWW Set up the printer 63
How do I... (printer
assembly topics) [4500]