HP Designjet 4500 Printer series - Manual (Page 40)

Switch on for the first time
1. Plug the power cable into the rear of the printer, then plug the other end into the AC power outlet.
2. Turn the power switch at the rear of the printer to the on position.
3. If the power light on the front panel remains off, press the Power key to switch on the printer.
4. Wait until you see this front panel message. Highlight your language on the front panel using
the Up and Down keys. Press the Select key.
5. The front panel will now display how to install the ink supplies.
26 Chapter 2 How do I... (printer assembly topics) [4000] ENWW
How do I... (printer
assembly topics) [4000]