HP Designjet 4500 Printer series - Manual (Page 49)

4. Slide the roll of paper that came with your printer onto the spindle. Make sure the paper is
oriented exactly as shown.
NOTE There is also a label on the spindle showing the correct orientation.
5. Put the blue paper stop onto the spindle and push it on as far as it will go without using
excessive force.
6. Make sure the stop is seated correctly.
7. With the blue paper stop on the left, slide the spindle into the printer. The spindle lever will drop
down automatically as you insert the spindle.
ENWW Load a roll of paper onto the spindle 35
How do I... (printer
assembly topics) [4000]