Remove the setup printheads – HP Designjet 4500 Printer series User Manual
Page 43
Advertising
11. Close the ink cartridge door (push it until it clicks shut).
12. Wait (about a minute) until you see this front panel message.
Remove the setup printheads
1.
Open the printer window.
2.
Remove the packing tape that is holding down the printhead carriage latch.
3.
Pull up and release the latch on top of the carriage.
ENWW
Remove the setup printheads
29
How do I... (printer
assembly topics) [4000]
Advertising
This manual is related to the following products: