Use non-hp paper, Cancel the drying time, Change the drying time – HP Designjet 4500 Printer series User Manual
Page 142
●
●
for the HP Designjet 4500mfp
If you do not find the media profile you want on the Web, you may find that it has been added to the
latest firmware for your printer. You can check the firmware release notes for information. See
Update my printer's firmware.
Use non-HP paper
HP's own paper types have been fully tested with the printer and can be expected to give the best
print quality.
However, you can print on paper from any manufacturer. In that case, you should select (in the front
panel) the HP paper type that is most similar to the paper you will be using. If in doubt, try several
different HP paper type settings, and choose the one that provides you with the best print quality. If
results are not entirely satisfactory with any paper type setting, see General advice.
Cancel the drying time
Press the Form Feed and Cut key (1) on the front panel.
CAUTION A print that has had insufficient time to dry can suffer from quality problems.
Change the drying time
You may wish to change the drying time setting to suit special printing conditions.
Select the
icon, then Select drying time. You can select Extended, Optimal, Reduced, or None.
See Drying time.
128
Chapter 6 How do I... (paper topics)
ENWW
How do
I... (paper topics)