HP Designjet 4500 Printer series - Manual (Page 26)

Get started
The following topics describe how to assemble your new printer (also described in the Setup
instructions).
Because some of the components of the printer are bulky, you may need up to four people to lift
them. You will also need at least 3 × 5 m (10 × 16 ft) of empty floor space, and about two hours.
The symbols on the boxes identify the contents. Refer to the table below:
Symbol on box Contents of box
Printer body
Stand and bin assembly
Consumables box, including ...
Maintenance Kit (please keep this safe)
Spare box (used while attaching the stand to the printer)
Unpack the printer
Before you start unpacking, consider where you are going to put the assembled printer. You should
allow some clear space at the back and at the front of the printer. The recommended clearances are
shown in the illustration below.
12 Chapter 2 How do I... (printer assembly topics) [4000] ENWW
How do I... (printer
assembly topics) [4000]