HP Designjet 4500 Printer series - Manual (Page 29)

4. You now need to identify which is the left and the right side of the cross-brace.
(1) left (2) right (3) one hole (4) two holes
5. Now you will need the bag of screws and the screwdriver provided. You may notice that the
screwdriver is slightly magnetic.
6. Remove the two leg covers from the left leg.
7. Lower the left leg onto the left side of the cross-brace. The left leg will fit only on the left side of
the cross-brace.
8. Fix the left leg to the cross-brace using four screws on the inner side of the leg.
ENWW Assemble the stand 15
How do I... (printer
assembly topics) [4000]