HP Designjet 4500 Printer series User Manual
Page 80
Advertising
15. Install the Quick Reference Guide holder. Angle the holder at the top (1), then position the two
hooks and clip the lower part (2) to the rear of the printer.
16. Remove the two yellow plastic screws from the right and left side of the paper feed.
17. Remove the two yellow plastic screws from the left and right side of drawer 2.
66
Chapter 3 How do I... (printer assembly topics) [4500]
ENWW
How do I... (printer
assembly topics) [4500]
Advertising
This manual is related to the following products: