HP Designjet 4500 Printer series User Manual
Page 73
Advertising
3.
Remove the roll module from the plastic bag.
4.
Remove the remaining two yellow plugs from the left and right legs. It is important to remember
the positions of these holes.
5.
Turn the roll module over into an inverted position as shown. Then carry it over to the front of
the inverted printer.
6.
Rest the roll module next to the first printer crossbar.
1. The rear of the printer.
ENWW
Attach the roll module
59
How do I... (printer
assembly topics) [4500]
Advertising
This manual is related to the following products: