HP Designjet 4500 Printer series User Manual
Page 131
9.
Align the leading edge of the sheet with the metal bar in the platen.
Align the right-hand edge of the sheet with the left edge of the half-circle on the platen, as
shown below.
10. Lower the window.
11. Lower the paper load lever.
12. If the paper has been loaded successfully, the front panel displays the Ready message and the
printer is ready to print. If something has gone wrong (paper mispositioned or misaligned),
follow the instructions on the front panel.
13. If you are printing on a sheet of paper less than 900 mm in length (up to A1 size), deploy the
three mobile stoppers on the bin.
NOTE When printing on sheet paper you are recommended to select Normal or Best print
quality, see Change the print quality.
NOTE If you have an unexpected problem at any stage of the paper loading process, see
The paper cannot be loaded successfully [4000].
ENWW
Load a single sheet [4000]
117
How do I...
(paper topics)