HP Designjet 4500 Printer series - Manual (Page 240)

4. Press and hold the arrow down key until the insertion slot stops adjusting itself.
5. Make a test scan to check for errors. Errors will be easier to see in an image with a clear
diagonal line.
NOTE A large document may need to be supported with both hands on its way in and
out of the scanner.
If lines seem uneven, proceed as follows:
1. In the Setup tab, select the Options button, then the Scanning button.
2. In the Scan Options dialog, press the Scanner button.
3. In the Scanner dialog, press the Setup button.
4. Select the Extended Thickness tab, and check the box labeled “Use extended thickness paper
handling”.
226 Chapter 16 How do I... (scanner topics) [4500] ENWW
How do I... (scanner
topics) [4500]