HP Designjet 4500 Printer series User Manual
Page 135
3.
Load the roll and spindle into the drawer. Hold the roll as shown by the paper stops at each end
of the spindle. Try to avoid touching the paper surface.
CAUTION Two people may be needed to load a heavy roll.
4.
Lift the paper load lever. Lift the upper lever if you are loading the upper roll, the lower lever if
you are loading the lower roll.
5.
Make sure that the leading edge of the paper is free from wrinkles, tears, and excessive curl, as
these defects may cause a paper jam. If necessary, trim the leading edge before loading (see
Trim the paper with the manual cutter [4500]).
6.
Carefully insert the leading edge of the roll into the front path.
WARNING! Take care not to push your fingers inside the front path. It is not designed
to accommodate fingers, and the results may be painful.
7.
The printer beeps when the paper has been inserted far enough.
ENWW
Load a roll into the printer [4500]
121
How do I...
(paper topics)