HP Designjet 4500 Printer series - Manual (Page 99)

Assemble the bin
1. Locate all the parts for the bin assembly. The screwdriver is the same one used to fix the roll
module to the printer stand.
2. Lay one end frame on the floor. Hold one cross frame vertically with the angled part located at
the top of the end frame. The cross frame must be fixed onto the inside of the shortest leg of the
end frame.
3. Fix the cross frame to the end frame using two screws.
ENWW Assemble the bin 85
How do I... (printer
assembly topics) [4500]