Load a roll into the printer [4500 – HP Designjet 4500 Printer series User Manual
Page 134
If you are a regular user of different paper types, you can change rolls more quickly if you pre-load
rolls of different paper types on different spindles. Extra spindles are available for purchase.
Load a roll into the printer [4500]
NOTE This topic applies to the HP Designjet 4500 Printer series only.
To start this procedure you need to have a roll loaded on the spindle. See Load a roll onto the
spindle [4500].
1.
At the printer's front panel, select the
icon, then Paper load > Load roll 1 or Load roll 2.
Hint This step is optional. You may skip it and start the loading process without using
the front panel, by pulling out the drawer as shown below.
2.
Lift the drawer upwards a little, then pull it towards you.
120
Chapter 6 How do I... (paper topics)
ENWW
How do
I... (paper topics)