Change the language of the front panel, Access the embedded web server – HP Designjet 4500 Printer series User Manual
Page 117
4.
Remove the power cord from the power socket.
5.
Wait for 10 seconds.
6.
Insert the power cord into the power socket and switch on the printer using the power switch.
7.
Check that the Power light on the front panel comes on. If it does not, use the Power key to
switch the printer on.
Change the language of the front panel
There are two possible ways to change the language of the front-panel menus and messages.
●
If you can understand the current front panel language, go to the front panel and select the
icon, then Printer configuration > Front panel options > Select language.
●
If you cannot understand the current front panel language, start with the printer powered off. At
the front panel, press the Select key and hold it down. While holding the Select key down, press
the Power key and hold it down. Continue to hold down both keys until the green light on the left
side of the front panel starts flashing, then release both keys. You can expect a delay of about
one second. If the green light starts flashing without any delay, you may need to start again.
Whichever method you used, the language selection menu should now appear on the front panel.
Highlight your preferred language, then press the Select key.
Access the Embedded Web Server
The Embedded Web Server enables you to manage your printer and your printing jobs remotely
using an ordinary Web browser running on any computer.
NOTE In order to use the Embedded Web Server, you must have a TCP/IP connection to
your printer. If you have an AppleTalk, Novell, or USB connection to your printer, you will not
be able to use the Embedded Web Server.
The following browsers are known to be compatible with the Embedded Web Server:
●
Internet Explorer 5.5 or later, for Windows.
●
Internet Explorer 5.2.1 or later, for Mac OS 9.
●
Internet Explorer 5.1 or later, for Mac OS X.
●
Netscape Navigator 6.01 or later.
●
Mozilla 1.5 or later.
●
Safari.
ENWW
Change the language of the front panel
103
How do I... (printer operation topics)