Unload a single sheet [4000, Load a roll onto the spindle [4500 – HP Designjet 4500 Printer series User Manual
Page 132
Unload a single sheet [4000]
NOTE This topic applies to the HP Designjet 4000 Printer series only.
At the printer's front panel, select the
icon, then Paper unload > Unload sheet.
To give the ink time to dry, the printer holds the sheet for some time (see Drying time).
Load a roll onto the spindle [4500]
NOTE This topic applies to the HP Designjet 4500 Printer series only.
1.
Push the grey button and remove the blue paper stop from the spindle.
2.
If your roll has a three-inch cardboard core, ensure that the core adaptors supplied with the
printer have been installed. See below:
3.
The roll may be long and heavy; rest the spindle horizontally on a table and load the roll on the
table. Bear in mind that you may need two people to handle it.
4.
Slide the new roll onto the spindle. Make sure the paper type is oriented as shown. If it is not,
remove the roll, turn it 180 degrees and slide it back on to the spindle.
NOTE There is also a diagram on the outside face of each paper stop showing the
correct orientation.
118
Chapter 6 How do I... (paper topics)
ENWW
How do
I... (paper topics)