HP Designjet 4500 Printer series - Manual (Page 22)

10. The Back key goes back to the previous menu. If you press it repeatedly, or hold it down, you
will soon return to the main menu.
11. The Down key moves to the next item in a list, or decreases a numerical value.
To highlight an item in the front panel, press the Up or Down key until the item is highlighted.
To select an item in the front panel, first highlight it and then press the Select key.
The four front-panel icons are all found in the main menu. If you need to select or highlight an icon,
and you don't see the icons in the front panel, press the Back key until you can see them.
When this guide shows a series of front panel items like this: Item1 > Item2 > Item3, it means that
you should select Item1, then select Item2, then select Item3.
Information about specific uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
● The Embedded Web Server, which runs in the printer and enables you to use a Web browser
on any computer to submit and manage print jobs, and check ink levels and printer status
● The HP-GL/2 and RTL driver for Windows
● The PostScript driver for Windows (HP Designjet 4000ps and 4500ps only)
● The PostScript driver for Mac OS 9 (HP Designjet 4000ps only)
● The PostScript driver for Mac OS X (HP Designjet 4000ps and 4500ps only)
● The ADI driver for AutoCAD 14
Scanner software [4500]
NOTE This topic applies to the HP Designjet 4500 Printer series only.
The scanner software is installed in the scanner's touch screen, and will run automatically when you
switch on the touch screen. The first page that you see can be divided into two main sections:
● The viewing section on the left, for viewing scanned images
● The control section on the right
8 Chapter 1 Introduction ENWW
Introduction