HP Designjet 4500 Printer series - Manual (Page 28)

6. Remove the two packing pieces.
Assemble the stand
WARNING! When you are unpacking the leg assembly, you will see that there is anti-slip
material around two of the wheels on the feet. Do not remove this material yet.
1. Remove the first tray from the stand and bin assembly box.
2. From the first tray, remove the two boxes marked with L and R. Place them on the floor as
shown.
3. Lower the cross-brace on to the L and R boxes.
14 Chapter 2 How do I... (printer assembly topics) [4000] ENWW
How do I... (printer
assembly topics) [4000]