Attach the stand – HP Designjet 4500 Printer series User Manual
Page 31
Advertising
14. Fix the left foot using four screws.
15. Position a foot on the right leg. There are pins to help you to position the foot correctly.
NOTE Do not remove the anti-slip material from the wheel.
16. Fix the right foot using four screws.
Attach the stand
1.
You now need to identify the left and right of the printer. This information is shown on the foam
end packs. Also identify the rear of the printer.
ENWW
Attach the stand
17
How do I... (printer
assembly topics) [4000]
Advertising
This manual is related to the following products: