HP Designjet 4500 Printer series - Manual (Page 34)

8. Remove the pallet before trying to lift the printer into an upright position.
9. Using four people and the hand holds on the rear of the printer body, carefully lift the printer into
an upright position. The anti-slip material should stop the printer from sliding forwards.
Remove packaging materials
1. Remove the two foam end packs and the plastic covering the printer.
2. Position the left leg cover on the front of the left leg (1), then clip the rear edge (2) into place.
20 Chapter 2 How do I... (printer assembly topics) [4000] ENWW
How do I... (printer
assembly topics) [4000]