HP Designjet 4500 Printer series - Manual (Page 48)

8. Wait until you see this front panel message, then press the Select key.
Load a roll of paper onto the spindle
1. Lower the spindle lever.
2. Remove the right-hand end of the spindle (1) from the printer, then move it to the right in order
to extract the other end (2). Do not insert your fingers into the spindle supports during the
removal process.
3. Remove the blue paper stop (1) from the left-hand end of the spindle. Keep the spindle
horizontal.
34 Chapter 2 How do I... (printer assembly topics) [4000] ENWW
How do I... (printer
assembly topics) [4000]