HP Designjet 4500 Printer series - Manual (Page 57)

Jetdirect print server
To install the Jetdirect card:
1. Go to the rear of the printer and remove a small cover plate secured by two screws near the left-
hand side.
2. Insert the Jetdirect card and secure it with the screws that accompany the card.
3. Save the cover plate and screws in case you decide to remove the Jetdirect card later.
To check that the card has been correctly installed, go to the front panel and select the icon, then
I/O setup > Jetdirect EIO > View information.
ENWW Install accessories 43
How do I... (printer
assembly topics) [4000]