Timer, After a clean cycle, Self-cleaning oven – GE ZDP486NDPSS User Manual

Page 27

Advertising
background image

Timer

127(The timer is independent of all the other

functions and does not control the oven.

7RVHWWKHWLPHU

 Push the 7,0(5 button.

 Turn the 0LQL.QREto adjust any length of

time up to 12 hours and push to select it.

On double oven models, each oven control has

its own timer function. Each timer can be set

independently.
The control will beep with 1 minute remaining

and the display will show seconds until the timer
FRXQWVGRZQWR:KHQWKHWLPHUUHDFKHV
WKHFRQWUROZLOOEHHSWLPHVIROORZHGE\

one beep every 6 seconds until the 0LQL.QRE is

pushed.

7RFDQFHOWKHWLPHU
1. Push the 7,0(5 button.
2. Turn the 0LQL.QREWRDQGSXVKWRVHOHFW

7RDGMXVWWKHWLPHUDIWHUVWDUW
1. Push the 7,0(5 button.
2. Turn the 0LQL.QRE to a new desired time and

push to select.

127( The timer cannot be used while the oven is

self-cleaning. (On double oven models, the timer

for the oven that is not in the self-cleaning mode

may be used.)

After a

clean cycle

You may notice some white ash in the oven. Wipe

it up with a damp cloth after the oven cools.
If white spots remain, remove them with warm sudsy

water and rinse thoroughly with a vinegar and water

mixture. These deposits are usually a salt residue that

cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat

the cycle.

Self-Cleaning Oven

Professional Dual Fuel Range

Mini-Knob
Turn to adjust
Push to select

27

Advertising
This manual is related to the following products: