Campbell Scientific CR1000 Measurement and Control System - Manual (Page 360)

Section 8. Operation
360
Figure 114: DevConfig Deployment | Advanced tab
Table 86. PakBus-LAN Example Datalogger-Communications Settings
Software→ Device Configuration Utility (DevConfig)
Tab→ Deployment
Sub-Tab→ Datalogger ComPort Settings Advanced
Setting→ PakBus Adr COM1 COM2 Is Router
Sub-Setting→ Baud Rate Neighbors
1 Baud Rate Neighbors
1
Datalogger ↓ Begin: End: Begin: End:
CR1000_1 1 115.2K Fixed 2 2 115.2K Fixed 3 4 Yes
CR1000_2 2 115.2K Fixed 1 1 Disabled No
CR1000_3 3 115.2K Fixed 1 1 115.2K Fixed 4 4 Yes
CR1000_4 4 115.2K Fixed 3 3 Disabled No
1
Setup can be simplified by setting all neighbor lists to Begin: 1 End: 4.