Campbell Scientific CR1000 Measurement and Control System - Manual (Page 537)

Appendix B. Status Table and Settings
537
Table 121. Status-Table Fields and Descriptions
Fieldname Description Variable Type Default Range Edit? Info Type
TCPPort
Specifies the port used for
Ethernet socket
communications.
Long 6785 0 - 65535 Yes
pppInterface
Controls which datalogger
port PPP service is
configured to use. Warning:
If this value is set to CS I/O
ME, do not attach any other
devices to the CS I/O port.
Integer 0 (Inactive)
pppIPAddr
Specifies the IP address that
is used for the PPP interface
if that interface is active (the
PPP Interface setting needs
to be set to something other
than Inactive).
String 0.0.0.0
pppUsername
Specifies the user name that
is used to log in to the PPP
server.
String
pppPassword
Specifies the password that is
used to log in to the PPP
server.
String
pppDial
Specifies the dial string that
follows ATD (e.g., #777 for
Redwing CDMA) or a list of
AT commands separated by
';' (e.g., ATV1;
AT+CGATT=0;ATD*99***
1#), that are used to initialize
and dial through a modem
before a PPP connection is
attempted. A blank string
means that dialing is not
necessary before a PPP
connection is established.
String
pppDialResponse
Specifies the response
expected after dialing a
modem before a PPP
connection can be
established.
String connect Yes
Messages
Contains a string of messages
that can be entered by the
user.
String Yes
CalGain 19
Calibration table of gain
values. Each integration /
range combination has a gain
associated with it. These
numbers are updated by the
background slow sequence.
Float array of 18 Calib