Campbell Scientific CR1000 Measurement and Control System - Manual (Page 421)

Section 9. Maintenance
421
For all returns, the customer must fill out a "Statement of Product Cleanliness and
Decontamination" form and comply with the requirements specified in it. The
form is available from our web site at www.campbellsci.com/repair. A completed
form must be either emailed to [email protected] or faxed to 435-227-
9579. Campbell Scientific is unable to process any returns until we receive this
form. If the form is not received within three days of product receipt or is
incomplete, the product will be returned to the customer at the customer's
expense. Campbell Scientific reserves the right to refuse service on products that
were exposed to contaminants that may cause health or safety concerns for our
employees.