Debug ospf lsa – Allied Telesis AT-S83 User Manual
Page 113
AT-S83 Management Software Command Line Interface User’s Guide
113
DEBUG OSPF LSA
Syntax
debug ospf lsa flooding|generate|install|maxage
|refresh
no debug lsa status|events|timers
Parameters
flooding
Displays Link State Advertisements (LSA) flooding information.
generate Displays LSA generation information.
install
Displays LSA installation information.
maxage
Displays the maximum age of the LSA in seconds.
refresh
Displays the LSA refresh information.
Description
Use the DEBUG OSPF LSA command to display troubleshooting
information related to the internal operations of LSAs. Use the no form of
this command or the UNDEBUG OSPF LSA command to disable this
function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command displays LSA refresh information:
switch(config)#debug ospf lsa refresh
The following command displays the maximum age of the LSA:
switch(config)#debug ospf lsa maxage
Related Commands