Undebug ospf lsa – Allied Telesis AT-S83 User Manual
Page 93
AT-S83 Management Software Command Line Interface User’s Guide
93
UNDEBUG OSPF LSA
Syntax
undebug ospf lsa flooding|generate|install|maxage
|refresh
no undebug lsa status|events|timers
Parameters
flooding
Displays Link State Advertisements (LSA) flooding information.
generate Displays LSA generation information.
install
Displays LSA installation information.
maxage
Displays the maximum age of the LSA in seconds.
refresh
Displays the LSA refresh information.
Description
Use the UNDEBUG OSPF LSA command to disable the display of
troubleshooting information related to the internal operations of LSAs. Use
the no form of this command to disable this function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command disables the display of LSA refresh information:
switch(config)#undebug ospf lsa refresh
The following command disables the display of the maximum age of
the LSA:
switch(config)#undebug ospf lsa maxage
Related Commands