Allied Telesis AT-S83 - Manual (Page 218)

Chapter 11: 802.1x Access Control Commands
218
DOT1X REAUTHMAX
Syntax
dot1x reauthMax <1-10>
no dot1x reauthMax <1-10>
Parameters
1 -10 Maximum number of reauthentication attempts after which
the port is considered unauthorized. The default number of
attempts is 2.
Command Mode
Interface mode
Description
Use the DOT1X REAUTHMAX command to set the maximum number of
reauthentication attempts. After the maximum number has been reached,
the interface is unauthorized.
Use the no form of this command to set the reauthentication maximum to
the default value of 2.
Examples
The following commands set the maximum reauthentication value to 5 on
interface 3:
switch# configure terminal
switch(config)# interface xe3
switch(config-if)# dot1x reauthMax 5
The following commands set the maximum reauthentication value to its
default value on interface 4:
switch# configure terminal
switch(config)# interface xe4
switch(config-if)# no dot1x reauthMax