Undebug ospf route – Allied Telesis AT-S83 User Manual
Page 98
Chapter 5: Privileged Executive Mode Commands
98
UNDEBUG OSPF ROUTE
Syntax
undebug ospf route ase|ia|install|spf
no undebug ospf route ase|ia|install|spf
Parameters
ase
Specifies debugging of external route calculation
information.
ia
Specifies the debugging inter-area route calculation
information.
install
Specifies debugging of route installation information.
spf
Specifies the debugging of SPF calculation information.
Description
Use the UNDEBUG OSPF ROUTE command to disable debugging of
route calculation. Use this command without parameters to turn on all the
options.
Use the no form of this command to disable this function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command disables the debug option for external route
calculation information:
switch(config)#undebug ospf route ase
The following command disables debugging for inter-area route
calculation information:
switch(config)#undebug ospf route ia
Related Commands