Show interface switchport – Allied Telesis AT-S83 User Manual
Page 62
Chapter 4: View Mode Commands
62
SHOW INTERFACE SWITCHPORT
Syntax
show interface switchport all
Parameters
none
Description
Use the SHOW INTERFACE SWITCHPORT command to display the
status of the 8 10-Gigabit ports.
Command Mode
View mode
Example
The following is an example of the SHOW INTERFACE SWITCHPORT
command and the sample output:
switch#show interface switchport
Interface name:
xe1
Switchport mode:
access
Ingress filter:
enable
Acceptable frame types:
all
Default Vlan:
1
Configured Vlans:
2
Interface name:
xe2
Switchport mode:
access
Ingress filter:
enable
Acceptable frame types:
all
Default Vlan:
1
Configured Vlans:
2
Interface name:
xe3
Switchport mode:
access
Ingress filter:
enable
Acceptable frame types:
all
Default Vlan:
1
Configured Vlans:
3
Interface name:
xe4
Switchport mode:
access
Ingress filter:
enable
Acceptable frame types:
all
Default Vlan:
1
Configured Vlans:
3