Allied Telesis AT-S83 - Manual (Page 116)

Chapter 6: Configuration Terminal Mode Commands
116
DEBUG OSPF PACKET
Syntax
debug ospf packet dd|detail|hello|ls-ack
|ls-request|ls-update|recv|send
no debug ospf packet dd|detail|hello|ls-ack
|ls-request|ls-update|recv|send
Parameters
dd Specifies OSPF database information.
detail Sets the debug option to detailed information.
hello Specifies OSPF hello packets.
ls-ack Specifies OSPF link-state acknowledgements.
ls-request Specifies OSPF link-state requests.
ls-update Specifies OSPF link-state updates.
recv Specifies received packets.
send Specifies sent packets.
Description
Use the DEBUG OSPF PACKET command to enable debugging options
for OSFP packets. Use the no form of this command or the UNDEBUG
OSPF PACKET command to disable this function.
Command Modes
Privileged Executive and Configuration Terminal modes
Examples
The following command enables the debug option for received packets:
switch(config)#debug ospf packet recv
The following command enables debugging for OSPF hello packets:
switch(config)#debug ospf packet hello