Allied Telesis AT-S83 - Manual (Page 53)

AT-S83 Management Software Command Line Interface User’s Guide
53
DEBUG RIP
Syntax
debug rip all|events|nsm|packet
no debug all|events|nsm|packet
Parameters
rip Indicates the Routing Information Protocol.
all Turns on debugging for all of the RIP parameters
listed below.
events Turns on debugging for RIP events.
nsm Turns on debugging for NSM information.
packet Turns on debugging of RIP packets.
Description
Use this command to debug RIP parameters. Use the no form of this
command to turn off debugging for the specified set of RIP parameters.
Command Modes
View and Privileged Executive modes
Examples
The following command debugs RIP events:
switch#debug rip events
The following command debugs RIP packets:
switch#debug rip packets
The following command turns off debugging of all RIP parameters:
switch#no debug rip all
Related Commands
none