Show ip rip database – Allied Telesis AT-S83 User Manual
Page 303
AT-S83 Management Software Command Line Interface User’s Guide
303
SHOW IP RIP DATABASE
Syntax
show ip rip database
Parameters
none
Description
Use the SHOW IP RIP DATABASE command to display information about
the RIP database. To modify the lines displayed, use “|” the output
modifier token. To save the output to a file, use “>,” the output redirection
token.
Command Mode
View and Privileged Executive modes
Example
The following command displays the RIP database information.
switch#show ip rip database
Codes: R - RIP, K - Kernel, C - Connected, S - Static, O -
OSPF, I - IS-IS, B - BGP
Network
Next Hop
Metric From
If
Time
K
0.0.0.0/0
10.0.1.1 16
xe2 01:58
C 10.0.1.0/24
1
xe2
S 10.10.10.0/24
1
xe2
C 10.10.11.0/24
1
xe2
S 192.168.101.0/24
1
xe2
R 192.192.192.0/24
1
--
See Table 16 on page 301 for a definition of the command headings.
Related Commands
“ROUTE” on page 297, “NETWORK” on page 290, “CLEAR IP” on
page 47
Equivalent Command