Allied Telesis AT-S83 - Manual (Page 56)

Chapter 4: View Mode Commands
56
DEBUG STP
Syntax
debug stp all|cli|event|packet|sync|timer
Parameters
stp Indicates the Spanning Tree Protocol.
all Turns on debugging for all of the following STP
parameters.
cli Turns on echo commands to the console.
event Turns on echo events to console.
packet Turns on echo packet contents to the console.
protocol Turns on protocol change to the console.
timer Turns on echo timer expiry to the console.
Description
Use this command to access STP parameters.
Command Modes
View and Privileged Executive modes
Examples
The following command debugs all of the STP parameters:
switch#debug stp all
The following command displays (or echoes) STP commands on the
console:
switch#debug stp cli
Related Commands
none