Allied Telesis AT-S83 - Manual (Page 120)

Chapter 6: Configuration Terminal Mode Commands
120
ENABLE PASSWORD
Syntax
enable password (8) LINE
Parameters
8 Specifies a hidden password will follow. This is an
optional parameter.
LINE Specifies a password for the Privileged Executive
Mode. Enter an alphanumeric value.
Description
This command assigns a password for the commands in the Privileged
Executive mode. By default, there is no password assigned. For
information about the Privileged Executive mode commands, see Chapter
5, “Privileged Executive Mode Commands” on page 67.
Command Mode
Configuration Terminal mode
Example
The following commands assign the password to “rose7:”
switch#configure terminal
switch(config)#enable password rose7
Related Commands
“SHOW RUNNING-CONFIG” on page 64