Snmp-server location – Allied Telesis AT-S83 User Manual
Page 167
AT-S83 Management Software Command Line Interface User’s Guide
167
SNMP-SERVER LOCATION
Syntax
snmp-server location SYSTEM-LOCATION
no snmp-server location
Parameters
SYSTEM-LOCATION
Specifies the location of the switch. Choose a
value between 1 and 255 alphanumeric
characters. Spaces and special characters are
permitted. You do not have to use quotation
marks in location names that include spaces.
Description
Use the SNMP-SERVER LOCATION command to specify the switch
location. By default, a location is not configured.
Use the no form of this command to remove the location.
Command Mode
Configuration Terminal mode
Example
The following command specifies North First Street, Building 5 as the
system location:
switch#snmp-server location North First Street,
Building 5
Related Commands