Bernina dcet 2500 - Manual (Page 39)


1999 BERNINA Of America
Section C - page 1
SECTION C – 3-THREAD TECHNIQUES
W
IDE
3-T
HREAD
O
VERLOCK STITCH - Instruction Manual pg._____
• Left Needle only
• Used for:
Seaming stretchy knit fabrics
Finishing woven edges
Serging outside corners
C
ENTER
N
EEDLE
O
VERLOCK STITCH - Instruction Manual pg._____
• Used for:
Seaming fine fabrics
Finishing woven edges on linen and wool
Inside corners
Turning tubes
N
ARROW
O
VERLOCK STITCH - Instruction Manual pg._____
• Center Needle
• Stitch Selection Lever/Rolled Hem
Disengages the Stitch Finger.
• Some minor tension adjustments may need to be made to the Loopers
• Used for:
Seaming batiste and other fine fabrics.
Finishing the edge of fine fabrics.
3-
THREAD FLATLOCKING - Instruction Manual pg._____
• Right Hand Seam Guide
Adjust for fabric guiding.
• Position “D” on the Stitch Display Panel
Automatic Tension Adjustment for Flatlocking.
R
OLLED
H
EMMING - Instruction Manual pg._____
• The Upper Looper thread is visible.
• Woolly Nylon in the Upper Looper “fills in” like a sewing machine satin stitch.
• Stitch Selection Lever/Rolled Hem disengages the Stitch Finger.
• Position “C” on the Stitch Display Panel
Automatic Tension Adjustment for Rolled Edge