Thread rolled hem – Bernina dcet 2500 User Manual
Page 55
1999 BERNINA Of America
Section C - page 17
3-THREAD ROLLED HEM
Instruction Manual pg.___
Bernette
Advanced Guide Workbook pg.___
Serger Library – Simply Serging
Specialty Stitches
Tips and Tricks
•
Thread the serger for a 3-thread Overlock stitch using the Center Needle.
Use the Woolly Nylon in the Upper Looper.
•
Turn the Stitch Selection Dial to “C” on the Stitch Display Panel.
•
Adjust the Stitch Length to 1.75.
•
Locate the Stitch Selection Lever/Rolled Hem on the Stitch Plate and pull it
towards you to disengage the Stitch Finger.
•
Cutting Width should be at 2 (normal).
•
Place the fabric under the Presser Foot and serge along one 6” edge.
•
Return Stitch Length to normal.
•
Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away
from you).
•
Trim and mount the sample.
FABRIC:
Medium weight woven cotton fabric 3” X 6”
NEEDLES:
80/12
Universal
THREAD:
2 cones of serger thread
1
cone
of
Woolly
Nylon
PRESSER FOOT: Standard