Multipurpose foot, With the gathering attachment – Bernina dcet 2500 User Manual
Page 72
1999 BERNINA Of America
Section D - page 12
MULTIPURPOSE FOOT
With the Gathering Attachment
Instruction Manual pg.___
Feet-ures Unit ___pg.___
Instruction Manual for Multi-purpose Attachment with Guide
Instruction Manual for Gathering Attachment
•
Following the directions in the Instruction Manual on page___, thread for a
balanced 4-thread Overlock stitch using the Left and Center Needle.
•
Turn the Stitch Selection Dial to “A”.
•
Set Stitch Length to 3.
•
Adjust Differential Feed to 2.
•
Attach the Multi-Purpose Foot (no Guide) following the directions in the
Instruction Manual for Multi-Purpose Attachment with Guide.
•
Wrap the bias strip around the cord and place the cord in the groove under
the Presser Foot. Take 2 or 3 stitches into the fabric. Lower the Needles into the
fabric.
•
Attach the Gathering Attachment following the directions in the Instruction
Manual for Gathering Attachment.
•
Place the 3” X 18” fabric under the Gathering Attachment and next to the
Needles.
•
Serge covering the cord, gathering the fabric strip and seaming all layers
together.
•
Trim and mount the sample on the next page.
FABRIC:
Medium weight woven cotton bias strip 2” X 8”
Medium weight woven cotton 3” X 18”
12” of
3
/
8
” cotton cording
NEEDLES:
80/12
Universal
THREAD:
4 cones of serger thread
PRESSER FOOT: Multi-Purpose Foot with Guide