Bernina dcet 2500 - Manual (Page 82)


1999 BERNINA Of America
Section E - page 7
COVER STITCH HEM
W
OVEN
F
ABRIC
Instruction Manual pg.___
Feet-ures Unit ___pg.___
• Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference card. Insert the
Left and Right Needles and turn the Stitch Selection Dial to “F”.
• Following the instructions on page ___ of your Instruction Manual, thread the
serger for a 3-Thread wide (5mm) Cover Stitch.
• Fold up a 2” hem along the 6” edge of the fabric. Glue stick or pin in place.
• Using the markings on the stitch plate as a guide, place the fabric under the
Needles with the fold to the right of the Presser Foot. You are stitching on the
right side of the fabric.
• Cover Stitch the hem in place stopping with the Needles in the fabric.
• Turn the Handwheel away from you to raise the Needles to their highest position.
• Lift the Presser Foot and remove the fabric from under the Presser Foot.
• Trim and mount the sample.
FABRIC: Medium weight woven cotton 5” X 6”
NEEDLES: 80/12 Universal
THREAD: 3 cones of serger thread
PRESSER FOOT: Cover Stitch or Standard