Thread cover stitch, Center the fabric under the presser foot – Bernina dcet 2500 User Manual
Page 78
1999 BERNINA Of America
Section E - page 3
4-THREAD COVER STITCH
Instruction Manual pg.___
Feet-ures Unit ___pg.___
•
Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference Card. and turn
the Stitch Selection Dial to “F”.
•
Following the instructions on page ___ of your Instruction Manual thread the
serger for a 4-Thread Cover Stitch.
•
Center the fabric under the Presser Foot.
•
Cover Stitch the length of the fabric. Stop stitching with the Needles in the
fabric.
•
Turn the Handwheel away from you to raise the Needles to their highest
position.
•
Lift the Presser Foot and remove the fabric from under the Presser Foot.
•
Following the directions on page___ in the Instruction manual, remove the stitch.
•
Place the fabric under the Presser Foot and Cover Stitch the length of the
fabric again.
•
Following the directions on page___ in the Instruction manual, secure the thread
tail.
•
Trim and mount the sample.
FABRIC:
Medium weight cotton 3” X 6”
NEEDLES:
80/12
universal
THREAD:
4 cones of serger thread
(yellow, green, brown, purple)
PRESSER FOOT: Cover Stitch or Standard