Narrow top and bottom cover stitch – Bernina dcet 2500 User Manual
Page 86
1999 BERNINA Of America
Section E - page 11
NARROW TOP AND BOTTOM COVER STITCH
Instruction Manual pg._____
•
Convert the serger from Overlock to Cover Stitch using the directions on
page__ in the Instruction Manual or on the Quick Reference Card.
•
Insert the Left and Center Needles.
•
Stitch Selection Dial to “H”.
•
Attach the Fifth Spool Holder.
•
Following the instructions on page ___ of your Instruction Manual thread the
serger for a 3-thread Cover Stitch.
•
Push the Wiper Activating Lever towards the Needle Bar.
•
Lower the Wiper.
•
Thread the Wiper.
•
Fold the fabric in half to 2” X 6” and center the fabric under the Presser Foot.
•
Cover Stitch the length of the fabric. Stop stitching with the Needles in the
fabric.
•
Turn the Handwheel away from you to raise the Needles to their highest position.
•
Lift the Presser Foot and remove the fabric from under the Presser Foot.
•
Trim and mount the sample.
•
Remove the thread from the Wiper Spool Pin.
•
Disengage the Wiper and pull the Wiper Activating Lever away from the Needle
Bar to return the serger to a 2.5mm 3-thread Cover Stitch.
FABRIC:
medium weight woven cotton 4” X 6”
NEEDLES:
80/12
Universal
THREAD:
4 cones of serger thread
PRESSER FOOT: Standard