Attaching elastic with the super stretch stitch, Attach the elasticator foot – Bernina dcet 2500 User Manual
Page 64
1999 BERNINA Of America
Section D - page 4
ATTACHING ELASTIC WITH THE
SUPER STRETCH STITCH
Instruction Manual pg.___
Bernette
Advanced Guide Workbook Supplement I pg.___
Serger Library – Tips and Tricks
Instruction Manual for Elasticator Attachment
•
Attach the Upper Looper Converter.
•
Following the instructions on page ___ of your Instruction Manual thread the serger
for a Super Stretch Stitch using the Left and Center Needles. Use Woolly Nylon in
the Lower Looper.
•
Turn the Stitch Selection Dial to “B”.
•
Adjust Stitch Length to 4.
•
Adjust the Presser Foot Presser Lever to “H” (increase).
•
Attach the Elasticator Foot.
•
Following the instructions in the Instruction Manual for Elasticator Attachment, thread
the elastic through the Presser Foot and adjust the Set Screw on the Roller Guide.
•
Place the fabric under the Presser Foot and serge attaching the elastic as you sew.
•
Trim and mount the sample.
FABRIC:
Cotton or nylon Lycra 3” X 6”
12” of ½” nylon or cotton braid elastic
NEEDLES:
80/12 stretch or 11/75 ballpoint
THREAD:
2 cones of serger thread (Needles)
1 cone of Woolly Nylon (Lower Looper)
PRESSER FOOT: Elasticator Foot